 |
|
| Printer Model |
SumiMark® IV |
| Printing Method |
Thermal Transfer |
| Dot Density |
300 dpi. |
| Operating System |
Microsoft Windows XP, Vista and Windows 7 (English only) |
| Software |
SumiMark® Marking System 6.0 |
| Effective Print Width |
3.25" (82.55mm) |
| Tubing Diameters |
1/16" to 2" |
| Tubing |
See SumiMark® Tubing Product List. |
| Cut Length Range |
0.25" to 29" in increments of 0.01" |
| Font Types |
All Windows Fonts |
| Font Size |
5 pt. to 120 pt. (approx 0.08" to 1.65" tall) |
| Bar Code Type |
All basic barcodes |
| Sequencing |
Alpha and numeric, up to 2 simultaneous sequences |
| Ribbon |
See ribbon data sheets |
| System Dimensions |
Width: 10" (254mm)
Depth: 16" (406mm)
Height: 10" (254mm)
Weight: 25lbs (11.4kg) |
| Electrical Specifications |
Auto-Switching Power Supply: 110/220 VAC and 50/60 Hz |
| Communication Interface |
USB, Ethernet, Parallel and Serial |
Mark Permanence
Specifications |
SAE-AS5942 |
|
| The information contained in this brochure is believed to be correct and in accordance with accepted engineering practices. Because of the varied nature of the uses for these products each user should make their own evaluations regarding the suitability of these products for their specific application. Sumitomo Electric Interconnect Products, Inc. makes no warranties regarding the accuracy and completeness of the information and data contained herein, and disclaims any liability from the use or misuse of its products. Sumitomo Electric Interconnect Products, Inc. shall not be liable for any injury, loss or damage either directly, indirectly or as a consequence arising from the use or misuse of its products mentioned in this brochure, other than replacement of materials considered defective. |
|
|
|
| For further information please contact SEIP |
|
|
 |
1-800-758-3515
(US/Canada) |
|
1-760-761-0600
(Outside US/Canada) |
 |
E-mail SEIP |
|
|
|
|
|