USP Class VI
Property (Units) | Test Method | Requirement |
---|---|---|
Physical: | ||
Tensile strength (psi) | ASTM D638 | 3500 min. |
Elongation (%) | ASTM D638 | 200 min. |
Specific gravity | ASTM D792 | 2.0 max. |
Low temperature flex (-55℃) | AMS-DTL-23053 | No cracking |
Heat resistance (250℃, 168 hrs.) | ||
Elongation (%) | ASTM D638 | 100 min. |
Secant modulus (psi) | ASTM D882 | 100,000 min. |
Longitudinal change (%) | AMS-DTL-23053 | +10, -10 |
Electrical: | ||
Dielectric strength (volts/mil) | ASTM D876 | 400 min. |
Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1011 min. |
Chemical: | ||
Heavy Metals Content (Cd,Hg,Pb, As,Sb) | ICP-MS | <1 ppm total (all metals) |
Water absorption, % (23℃, 24 hrs.) | ASTM D 570 | 0.5 max. |
Fluid resistance (23℃, 24 hrs.) | ||
Isopropyl alcohol | ||
5% saline solution | ||
Ethylene glycol | ||
Followed by: | ||
Tensile strength (psi) | ASTM D2671 | 1,500 min. |
Dielectric strength (volts/mil) | ASTM D2671 | 500 min. | Shrink temperature, nominal | 150℃ |
*For reference use only
Nominal Size | Inside Diameter (As Supplied) | Inside Diameter (After Recovery) | Wall Thickness Nom (After Recovery) | |||
---|---|---|---|---|---|---|
inches | (mm) | inches | (mm) | inches | (mm) | |
3/64″ | .046 | 1.2 | .023 | 0.6 | .010 | 0.25 |
1/16″ | .063 | 1.6 | .031 | 0.8 | .010 | 0.25 |
3/32″ | .093 | 2.4 | .046 | 1.2 | .010 | 0.25 |
1/8″ | .125 | 3.2 | .062 | 1.6 | .010 | 0.25 |
3/16″ | .187 | 4.8 | .093 | 2.4 | .010 | 0.25 |
1/4″ | .250 | 6.4 | .125 | 3.2 | .012 | 0.30 |
3/8″ | .375 | 9.5 | .187 | 4.8 | .012 | 0.30 |
1/2″ | .500 | 12.7 | .250 | 6.4 | .012 | 0.30 |
3/4″ | .750 | 19.1 | .375 | 9.5 | .017 | 0.43 |
Standard Colors: Black Standard Package: Spooled (S) on plastic spool and supplied in sealed plastic bag. How to Order: (Type of material) (Size) (Color) (Packaging) Example: K2M 1/4 Black S |
For any information please Contact Us