AS23053
UL 224
Property (Units) | Test Method | Requirement |
---|---|---|
Physical: | ||
Tensile strength (psi) | ASTM D638 | 1500 min. |
Elongation (%) | ASTM D638 | 200 min. |
Specific gravity | ASTM D792 | 1.9 max. |
Low temperature flex (-55℃) | AMS-DTL-23053 | No cracking |
Heat shock (275℃, 4 hrs.) | AMS-DTL-23053 | No cracking |
Heat resistance (250℃, 168 hrs.) | ||
Elongation (%) | ASTM D638 | 100 min. |
Secant modulus (psi) | ASTM D882 | 25 x 104 max. |
Longitudinal change (%) | AMS-DTL-23053 | +10, -10 |
Electrical: | ||
Dielectric strength (volts/mil) | ASTM D876 | 500 min. |
Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1012 min. |
Chemical: | ||
Copper stability (180℃, 168 Hrs.) | ||
Elongation (%) | UL 224 | 70% of unaged value min. |
Water absorption (%) | ASTM D570 | 0.5 max. |
Fluid resistance (23℃, 24 hrs.) | ||
Tensile strength (psi) | AMS-DTL-23053 | 1000 min. |
Flammability | UL 224 VW-1 | Pass |
Shrink temperature, nominal | 130℃ |
Specification reference: AMS-DTL-23053/18, Class 3
UL224 File E70631 YDQS2
*For reference use only
Standard Size | Inside Diameter (As Supplied) | Inside Diameter (After Recovery) | Wall Thickness Nom (After Recovery) | |||
---|---|---|---|---|---|---|
inches | (mm) | inches | (mm) | inches | (mm) | |
1/8″ | .125 | 3.2 | .062 | 1.6 | .010 | 0.25 |
3/16″ | .187 | 4.8 | .093 | 2.4 | .010 | 0.25 |
1/4″ | .250 | 6.4 | .125 | 3.2 | .010 | 0.25 |
3/8″ | .375 | 9.5 | .187 | 4.8 | .012 | 0.30 |
1/2″ | .500 | 12.7 | .250 | 6.4 | .012 | 0.30 |
3/4″ | .750 | 19.1 | .375 | 9.5 | .017 | 0.43 |
1″ | 1.000 | 25.4 | .500 | 12.7 | .019 | 0.48 |
Standard Colors: Clear. Colors available subject to factory acceptance and quote. Standard Package: Spooled (S) How to Order: (Type of Material) (Size) (Color) (Packaging) Example: K3 1/4 Clear S |
For any information please Contact Us