–
–
Property (Units) | Test Method | Requirement |
---|---|---|
Physical: | ||
Tensile strength (psi) | ASTM D638 | 1200 min. |
Elongation (%) | ASTM D638 | 200 min. |
Longitudinal change (%) | ASTM D2671 | -10 min. |
Electrical: | ||
Dielectric strength (volts/mil) | IEC 243 | 200 min. |
Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1013 min. |
Dielectric constant | IEC 250 | 3.1 nom. |
Chemical: | ||
Water absorption (%) | ASTM D570 | 0.5 max. |
Shrink temperature, nominal | 121℃ | |
Fungus resistance | ASTM G21 | No growth |
Color stability | AMS-DTL-23053/15 | Pass |
Fluid resistance, 24 hrs. @ 23℃ | AMS-DTL-23053 | |
MIL-A-8243 | ||
MIL-H-5606 | ||
MIL-T-5624 | ||
MIL-L-7808 | ||
MIL-L-23699 | ||
5% NaCl solution | ||
Followed by: | ||
Tensile strength, psi | 750 psi | |
Elongation, % | 100 min. |
*For reference use only
Standard Size | Inside Diameter (As Supplied) | Inside Diameter (After Recovery) | Wall Thickness Nom (After Recovery) | |||
---|---|---|---|---|---|---|
inches | (mm) | inches | (mm) | inches | (mm) | |
5/8″ | 0.602 | 15.3 | 0.150 | 3.8 | 0.083 | 2.10 |
1-1/4″ | 1.252 | 31.8 | 0.217 | 5.5 | 0.130 | 3.30 |
2″ | 2.000 | 50.8 | 0.327 | 8.3 | 0.134 | 3.40 |
2-1/2″ | 2.500 | 63.5 | 0.500 | 12.7 | 0.140 | 3.55 |
3″ | 3.000 | 76.2 | 0.748 | 19.0 | 0.157 | 4.00 |
4″ | 4.000 | 101.6 | 0.898 | 22.8 | 0.169 | 4.30 |
Standard Colors: Black Standard Package: 6” long cut pieces ± ¼” (152.5 ± 6.5 mm) How to Order: (Type of material) (Size) (Color) (Packaging) Example: SCH(6X) 2” Black 6 IN. |
For any information please Contact Us