–
UL
CSA
| Property (Units) | Test Method | Requirement |
|---|---|---|
| Physical: | ||
| Tensile strength (psi) | ASTM D638 | 1500 min. |
| Elongation (%) | ASTM D638 | 200 min. |
| Specific gravity | ASTM D792 | 1.35 nom. |
| Low temperature flex (-55℃) | AMS-DTL-23053 | No cracking |
| Heat shock (250℃, 4 hrs.) | AMS-DTL-23053 | No cracking |
| Heat resistance (175℃, 168 hrs.) | ||
| Elongation (%) | ASTM D638 | 100 min. |
| Secant modulus (psi) | ASTM D882 | 2.5 x 104 max. |
| Longitudinal change (%) | AMS-DTL-23053 | +5, -15 |
| Electrical: | ||
| Dielectric strength (volts/mil) | ASTM D2671 | 500 min. |
| Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1014 min. |
| Chemical: | ||
| Corrosion (175℃, 16 Hrs.) | AMS-DTL-23053 | No corrosion |
| Water absorption (%) | ASTM D570 | 0.5 max. |
| Fluid resistance (23℃, 24 hrs.) | ||
| Tensile strength (psi) | AMS-DTL-23053 | 1000 min. |
| Flammability | UL 224 VW-1 | Pass |
| Shrink temperature, nominal | 90℃ | |
Specification reference: UL 224 125℃, 600 V, VW-1
CSA C22.2 No. 198.1-98
*For reference use only
| Standard Size | Inside Diameter (As Supplied) | Inside Diameter (After Recovery) | Wall Thickness Nom (After Recovery) | |||
|---|---|---|---|---|---|---|
| inches | (mm) | inches | (mm) | inches | (mm) | |
| 187/62″ | .187 | 4.8 | .062 | 1.6 | .020 | 0.51 |
| 375/125″ | .375 | 9.5 | .125 | 3.2 | .025 | 0.64 |
| 500/185″ | .500 | 12.7 | .185 | 4.7 | .028 | 0.71 |
| Standard Package: 4 feet (4′) How to Order: (Type of material) (Size) (Color) (Packaging) Example: B2 (Y/G) 187 Y/G 4′ |
||||||
For any information please Contact Us